Phifer SunScreen is woven vinyl-fiberglass screening manufactured for the primary use of reducing solar heat gain and glare. SunScreen absorbs and dissipates up to 70 percent of the sun's heat and glare before it reaches the window. SunScreen is easily installed on any type and size of window and also performs as an insect screening.
NFPA 101 (Class B Rating) and IBC Section 803.1.1 (Tested in accordance to ASTM E84) Class “A” rating
Certified to GREENGUARD and GREENGUARD Gold standards for low chemical emissions into indoor air during product usage
RoHS/Directive 2002/95/EC, US Consumer Product Safety Commission Section 101, ANSI/WCMA A 100.1-2007 for lead content and REACH (EC 1907/2006) compliant
|Standard Widths||36" (91.4cm), 48" (121.9cm), 60" (152.4cm), 72" (182.9cm), 84" (213.4cm), and 96" (243.8cm)|
|Standard Roll Length||100 Linear Feet (30.48m)|
|Composition||35% Fiberglass, 65% Vinyl on Fiberglass|
|Mesh Weight||8.5 oz/yd2 (288 g/m2)|
|Fabric Thickness||.019 (.48mm)|
|Openness Factor||Approximately 25%|
|UV Blockage||Approximately 75%|
|SUNSCREEN SOLAR OPTICAL PROPERTIES||SOLAR HEAT GAIN COEFFICIENT (SHGC)|
|SunScreen Silver Gray||24||13||63||26||0.28||0.28||0.26|
*TS - Solar Transmittance, RS - Solar Reflectance, AS - Solar Absorption, TV - Visual Transmittance *SHGC = Solar Heat Gain Coefficient *1/4 CL = 1/4" Clear Glass, 1 HA = 1" Heat Absorbing Glass *Installed as Screens, Thirty-Degree Profile Angle *Solar Heat Gain Coefficient (SHGC) shown calculated according to Office of Building Technology, State and Community Programs, Energy Efficiency and Renewable Energy, U.S. Department of Energy’s definition of SHGC. SHGC represents the percentage of solar heat gain that is transmitted to the interior through the glass and shading system. If you are using glass whose performance is listed in terms of SC, you may convert to SHGC by multiplying the SC by 0.87.